Como profesor universitario, la investigación es una parte integral de mi trabajo. Mis líneas de investigación actuales se centran en diseño estructural en madera, particularmente en la aplicación de nuevos conceptos, desarrollos y materiales. También he investigado sobre uniones estructurales de acero.

Los investigadores publicamos los resultados de nuestras investigaciones en unas revistas bastante peculiares. Aquí tienes un listado de los artículos que he publicado hasta ahora (agrupados por revista):

• Applied Mathematical Modelling
  • Cabrero J.M., Vargas G. (2015) Analysis of the validity of the three-point off-axis bending method. Applied Mathematical Modeling, 39(17), pp. 5265–5277. doi:10.1016/j.apm.2015.03.031
• Composite Structures
  • Cabrero J.M., Heiduschke A., Haller P. (2010) Analytical assessment of the load carrying capacity of axially loaded wooden reinforced tubes, Composite Structures, 92, pp. 2955-2965. doi:10.1016/j.compstruct.2010.05.007
• Construction and Building Materials
  • Yurrita M., Cabrero J.M. (2019) Brittle failure in the parallel-to-grain direction of multiple shear softwood timber connections with slotted-in steel plates and dowel-type fasteners, Construction and Building Materials, 216, pp. 296-313.
  • Yurrita M., Cabrero J.M. (2018) New criteria for the determination of the parallel-to-grain embedment strength of wood, Construction and Building Materials, 173, pp. 238-250. doi: 10.1016/j.conbuildmat.2018.03.127
• Engineering Structures
  • Iraola B., Cabrero J.M., Basterrechea-Arevalo M., Gracia J. (2021) A geometrically defined stiffness contact for finite element models of wood joints. Engineering Structures, 235, 112062. doi: 10.1016/j.engstruct.2021.112062
  • Yurrita M., Cabrero J.M. (2020) New design model for brittle failure in the parallel-to-grain direction of timber connections with large diameter fasteners. Engineering Structures, 217, 110557. doi: 10.1016/j.engstruct.2020.110557
  • Yurrita M., Cabrero J.M. (2020) Effective thickness of timber elements for the evaluation of brittle failure in timber-to-steel connections with large diameter fasteners loaded parallel-to-grain at the elastic range: A new method based on a beam on elastic foundation. Engineering Structures, 209, 109959. doi: 10.1016/j.engstruct.2019.109959
  • Cabrero J.M., Yurrita M. (2018) Performance assessment of existing models to predict brittle failure modes of steel-to-timber connections loaded parallel-to-grain with dowel-type fasteners. Engineering Structures, 171, pp. 895-910. doi: 10.1016/j.engstruct.2018.03.037
  • Stepinac M., Cabrero J.M., Ranasinghe K., Kleiber M.(2018) Proposal for reorganization of the connections chapter of Eurocode 5. Engineering Structures, 170, pp. 135-145. doi:  10.1016/j.engstruct.2018.05.058
  • Iraola B., Cabrero J.M. (2016) An algorithm to model wood accounting for different tension and compression elastic and failure behaviors, Engineering Structures, 117, pp. 332-343. doi:10.1016/j.engstruct.2016.03.021
  • Bayo E., Cabrero J.M., Gil B. (2006) An effective component based method to model semi-rigid connections for the global analysis of steel and composite structures, Engineering Structures, 28 (1), pp. 97-108. doi:10.1016/j.engstruct.2005.08.001
  • Cabrero J.M., Bayo E. (2005) Development of practical design methods for steel structures with semi-rigid connections, Engineering Structures, 27 (8), pp. 1125- 1137.  doi:10.1016/j.engstruct.2005.02.017
• European Journal of Wood and Wood Products
  • Valle Tager G.M., Hartig J.U., Cabrero J.M., Haller P. (2014) Selected mechanical properties of four Central American wood species. European Journal of Wood and Wood Products. 72 (5), pp. 699-702. doi:10.1007/s00107-014-0818-4
  • Cabrero, J.M., Blanco, C., Gebremedhin, K.G, Martín Meizoso, A. (2012) Assessment of phenomenological failure criteria for wood. European Journal of Wood and Wood Products, 70 (6), pp. 871-882. doi:10.1007/s00107-012-0638-3
• Journal of Constructional Steel Research
  • Cabrero J.M., Bayo E. (2007) The semi-rigid behaviour of three-dimensional steel beam-to-column joints subjected to proportional loading. Part I. Experimental evaluation, Journal of Constructional Steel Research, 63 (9), pp. 1241 – 1253.  doi:10.1016/j.jcsr.2006.11.004
  • Cabrero J.M., Bayo E. (2007) The semi-rigid behaviour of three-dimensional steel beam-to-column joints subjected to proportional loading. Part II. Theoretical model and validation, Journal of Constructional Steel Research, 63 (9), pp. 1254-1267.  doi:10.1016/j.jcsr.2006.11.005
• Materiales Compuestos
  • Cabrero J.M., Blanco C.; Vargas G. (2017) El método de flexión oblicua a tres puntos para determinar las propiedades de cortadura en el plano en madera, Materiales Compuestos, 1 (1), pp. 105-109.
• Mechanics of Materials
  • Blanco C., Cabrero J.M. , Martin-Meizoso A., Gebremedhin K.G. (2015) Design oriented failure model for wood accounting for different tensile and compressive behavior. Mechanics of Materials. 83, pp. 103-109. doi:10.1016/j.mechmat.2015.01.001
• Transactions of the ASABE
  • Cabrero J.M., Gebremedhin K. (2008) Finite Element Model for Predicting Stiffness of Metal-Plate Connected Tension Splice and Heel Joints of Wood Trusses, Transactions of the ASABE, 52(2), pp. 565- 573. doi:10.13031/2013.26828
• Wood Material Science & Engineering
  • Cabrero J.M., Honfi D., Jockwer R., Yurrita M. (2019)  A probabilistic study of brittle failure in dowel-type timber connections with steel plates loaded parallel to the grain, Wood Material Science & Engineering, 14 (5), pp. 298-311, doi: 10.1080/17480272.2019.1645206

• 2018
  • Yurrita, M. , Cabrero, J.M., Quenneville, P. (2018)  Multiple Shear Plane Timber Connections with Slotted-in Steel Plates and Dowel-type Fasteners: a Study of the Brittle Failure Mode in the Parallel-to-grain Direction. 5th meeting INTER 2018. International Network on Timber Engineering Research. Tallín, Estonia.
  • Cabrero, J.M. , Yurrita, M. (2018) Performance of the Different Models for Brittle Failure in the Parallel-to-Grain Direction for Connections with Dowel-Type Fasteners. 5th meeting INTER 2018. International Network on Timber Engineering Research. Tallín, Estonia.
  • Cabrero, J.M. Timber Construction in Spain. (2018) Eastern Europe Conference on Timber Constructions, 7-8 Junio, Járkov, Ucrania (Ponencia invitada)
  • Stepinac, M., Rajčić, V., Cabrero, J.M., Ranasinghe, K., Kleiber, M. (2018) Practitioners’ opinions about the EN 1995 – German point of view in comparison with the rest of Europe. Doktorandenkolloqium Holzbau Forschung + Praxis, 03/2018, Stuttgart, Alemania.

• 2017
  • Yurrita, M.; Cabrero, J.M. (2017) The embedment strength as a system property. 4th meeting INTER 2017. International Network on Timber Engineering Research. Kyoto, Japón.
  • Cabrero, J.M.; Rodriguez, V. (2017) Avances de la Acción COST FP1402: de la investigación a la futura normativa. LIGNOMAD 17. Congreso sobre Construcción con Madera y otros Materiales Lignocelulósicos. Barcelona, España
  • Cabrero, J.M.; Vargas, G.; Blanco, C. (2017) The three-point off-axis bending method for determining in-plane shear properties in wood. XII Congreso Nacional de Materiales Compuestos (MATCOMP 2017). San Sebastián, España
  • Yurrita, M.; Cabrero, J.M. (2017) New concepts for the development of a formula for the embedment strength of timber. CompWood 2017. Computational Methods in Wood Mechanics – from Material Properties to Timber Structures. Viena, Austria
  • Iraola, B.; Cabrero, J.M. (2017) Strategies to model wood behavior and progressive failure. CompWood 2017. Computational Methods in Wood Mechanics – from Material Properties to Timber Structures. Viena, Austria
•  2016
  • Iraola, B.; Cabrero, J. M.; Gil, B. (2016) Pressure-overclosure law for the simulation of contact in spruce joints. World Conference on Timber Engineering (WCTE 2016), Viena, Austria
  • Iraola, B.; Cabrero, J. M.; Gil, B. (2016) Study of load distribution between fasteners in GFRP and steel timber joints. World Conference on Timber Engineering (WCTE 2016), Viena, Austria
  • Cabrero, J. M; Iraola, B.; Gil, B. (2016) Estrategias para el modelado de uniones estructurales mecánicas de madera. I Jornadas LIGNOMAD. Red para el impulso de la madera y otros materiales lignocelulósicos en el sector de la construcción. Barcelona, Spain
• 2015
  • Iraola B., Cabrero J.M., Gil B. (2015) Study of load distribution among connectors in mechanical timber joints. DCE2015 | Doctoral Congress in Engineering. Oporto, Portugal.
  • Cabrero J.M., Iraola B. (2015) Wood or timber? Considerations on the numerical modelling of wood and its fracture. EUROMECH Colloquium 556. Theoretical, Numerical and Experimental Analyses in Wood Mechanics. Dresde, Alemania.
• 2013
  • Iraola B., Cabrero J.M. (2013). Estudio paramétrico sobre diferentes métodos de cálculo de la resistencia a rotura por tracción en la dirección perpendicular a la fibra (splitting) en uniones de madera. 6 Congreso Forestal Español. Vitoria, España.
  • Cabrero J.M., Goñi R., Olabe F. (2013). Nuevas propuestas para el uso de madera de haya. 6 Congreso Forestal Español. Vitoria, España.
• 2012
  • Martín-Meizoso A., Blanco C., Cabrero J.M., Gebremedhin K.G. (2012). Failure criteria for wood under multiaxial loading. 19th European Conference on Fracture (ECF19) Kazan, Rusia
  • Cabrero J.M., Heiduschke A., Haller P. (2012) Numerical and experimental investigation on wooden profiles with fiber confinement. 15th European Conference on Composite Materials, ECCM15. Venecia, Italia.
• 2011
  • Cabrero J.M., Heiduschke A., Haller P. (2011) On the design of structural wood profiles reinforced with composite fibers: parametric assessment . 16th International Conference on Composite Structures ICCS 16. Oporto, Portugal
  • Cabrero J.M., Heiduschke A., Haller P. (2011) Nuevas formas para la madera estructural. CIMAD 11 – 1 Congresso Ibero-LatinoAmericano da Madeira na Construção. Coimbra, Portugal
  • Blanco, C., Cabrero, J.M., Gebremedhin, K.G., Martin-Meizoso, A. (2011). Criterios de fallo de la madera bajo carga multiaxial. XXVIII GEF Encuentro del Grupo Español de Fractura. Gijón, España.
  • Cabrero, J.M., Heiduschke, A., Haller, P. (2011). Numerical and Experimental Investigation on Wooden Profiles with Fiber Confinement. Second International Conference on Multifunctional, Hybrid and Nanomaterials. Estrasburgo, Francia.
• 2010
  • Cabrero, J.M., Heiduschke, A., Haller, P. (2010). New Concepts on Structural Wood. 5th International Meeting on Biotechnology BIOTEC 2010. Pamplona, España.
  • Cabrero, J.M., Bayo, E., Haller, P. (2010). Simple Efficient Architecture. Structures & Architecture (ICSA 2010). Guimaraes, Portugal.
  • Cabrero, J.M., Gebremedhin, K.G. (2010). Evaluation of Failure Criteria in Wood Members. World Conference in Timber Engineering 2010 (WCTE 2010). Riva del Garda, Italia.
  • Cabrero, J.M., Heiduschke, A., Haller, P. (2010). Parametric Analysis of Composite Reinforced Tubes under Axial Compression. World Conference in Timber Engineering 2010 (WCTE 2010). Riva del Garda, Italia.
• 2009
  • Cabrero, J.M., Gebremedhin, K.G., Elorza, J. (2009). Criterios de rotura en miembros de madera. V Congreso Nacional y II Congreso Ibérico AGROINGENIERÍA 2009. Lugo, España.
  • Cabrero, J.M., Heiduschke, A., Haller, P. (2009). Diseño y análisis de perfiles estructurales de madera densificada conformada con refuerzos de fibras. 5 Congreso Forestal Español. Avila, España.
  • Cabrero, J.M., Heiduschke, A., Haller, P. (2009). Design and Analysis of Structural Wood Profiles Reinforced with Composite Fibers. 15th International Conference on Composite Structures (ICCS15). Oporto, Portugal.
  • Cabrero, J.M., Gebremedhin, K.G., Elorza, J. (2009) Evaluation of Failure Criteria in Wood Members. ASABE Annual International Meeting. Reno, Nevada, EE.UU.
• 2008
  • Heiduschke, A., Cabrero, J.M., Manthey, C., Haller, P., Günther, E. (2008) Mechanical Behaviour and Life Cycle Assessment of Fibre-Reinforced Timber Profiles. COST C-25: 1st Seminar (7th MC & 6th WG Sessions). Dresde, Alemania.
  • Cabrero, J.M., Gebremedhin, K.G. (2008) Finite element model for axial stiffness of metal-plate connected tension splice wood truss joints. 10th World Conference on Timber Engineering (WCTE 2008). Miyazaki, Japón.
• 2007
  • Cabrero, J.M., Bayo, E. (2007) Evaluation of the semi-rigid behaviour of three-dimensional extended end-plate steel joints in the framework of the component method. 6th International Conference on Steel and Aluminium Structures (ICSAS’07). Oxford, Reino Unido.
• 2006
  • Bayo, E., Gracia, J., Cabrero, J.M., Gil, B. (2006) Advanced global-member stability analysis of semi-rigid frames. International Colloquium on Stability and Ductility of Steel Structures. Lisboa, Portugal.
• 2005
  • Bayo, E., Cabrero, J.M. (2005) Modelado de uniones semi-rígidas en el análisis global de estructuras metálicas. Congreso de Métodos Numéricos en Ingeniería, SEMNI 2005. Granada, España.
• 2004
  • Bayo, E., Cabrero, J.M. (2004) Uniones semi-rígidas en estructuras de acero: una visión desde el diseño. Congreso de La Estructura de Acero, CEA 2004. La Coruña, España.
• 2003
  • Gil, B., Cabrero, J.M., Goñi, R., Bayo, E. (2003) An Assessment of the Rotation Capacity Required for Structural Hollow Sections for Plastic Analysis. Tubular Structures X. Madrid, España.